How it works
To operate, this mode needs Timecode to know how to position the cutting points.
To do this, you need to use the CSV to be downloaded at the end of this article.
According to the following screenshot, here's how to fill in the CSV with reference to the "cuePoints1" column
Please only fill in the "cuePoints1" column, even if you're listing several timecodes.
You can list a series of cutting points using this nomenclature:
HH:MM:SS.mmm,HH:MM:SS.mmm,HH:MM:SS.mmm or HH:MM:SS:ff,HH:MM:SS:ff,HH:MM:SS:ff
This format must be respected for the cutting point to be detected and applied:
Timecode in HH:MM:SS.mmm format
Timecode format HH:MM:SS:ff
Separated by a comma ,
No space between timecodes